What Are the Tips on How to Fix Bike Gears? Know More


What are The Tips on How to Fix Bike Gears? Know More


What are the tips on how to fix bike gears? Bike gears are what help your bicycle turn smoothly when pedaling. The gears work with the chain and sprocket on the rear wheel, so they are located inside the bicycle. To fix bike gears, you will need to find a screwdriver and remove a screw from the gear. Then loosen or tighten certain nuts to add or reduce the play in your gears between them; then put everything back together and tighten all screws. This can be done by yourself, although it is always best to seek out professional help from someone who has experience in bicycles because you may damage your bicycle if you do not know how to repair them.

Tips on how to fix bike gears

Below are some important tips on how to fix bike gears:

1, Check and see if the chain is in good condition.

The best way how to fix bike gears is to check the chain of your bicycle. If it is too loose, this may cause your gears to get messed up. A chain is not just a single piece that connects both pedals, it also holds the sprockets of your bike together, and this makes it vital for proper bike performance.

2, Look at your rear wheel sprockets or gears.

The next step to fix bike gears is to look at your rear wheel sprockets or gears. These are located on the rear portion of the bicycle, and they help turn either side of the bike when pedaling forward by using a chain that connects both sides as well as the front chain ring. On the rear wheel sprockets, you will see a bolt holding them together and tighten this bolt until you feel that both sprockets are flush. Remember, when tightening this bolt, you must tighten it equally on both sides, not just one.

3, Look at your bicycle chain.

The next step in how to fix bike gears is to look at your bicycle chain. If it is too loose or appears damaged, it will be best to remove the chain from the bicycle and put it in a safe place before doing any work to fix bike gears, as chains can be dangerous. If your chain is not damaged, it will be safe to take it out and put it back into the bike after performing the task on to fix bike gears.

4, Loosen or tighten your rear hub nuts.

The next step to fix bike gears is to loosen or tighten your rear hub nuts. If you can't find a screwdriver, try holding an Allen wrench and hammer it into the holes of the nuts; then try tightening and loosening those nuts until you can no longer hear any grinding sound from the gears and sprockets when pedaling forward.

5, Put everything back together.

The next step to fixing bike gears is to put everything back together. This means that you must reassemble the rear wheel sprockets, rear chain ring, and chain, as well as the nuts that hold the gears and sprockets in place on the bicycle frame. When putting these pieces back together, remember not to tighten any screws when you are done working to fix bike gears, just tighten them all up at once.

6, Adjust your brakes.

The next step to fix bike gears is to adjust your brakes, and then you can ride your bicycle with ease. To adjust the brakes, try using the barrel adjusters located at the brake caliper of your bicycle. When adjusting these, simply tighten them until they stop rubbing, and it is best to test this out by riding your bicycle a few times.

7, Keep your bicycle away from extreme weather and wear protective gear.

The final step to fixing bike gears is to keep your bicycle away from extreme weather, as well as wear protective gear such as gloves and glasses. You should also make sure to clean off your bicycle regularly while it is not in use so that dust tends not to build up on it. 


The above tips to fix bike gears are some of the most effective ways how to fix bike gears. The tips are easy to follow, and they also work very well in fixing bicycle gears. Since bike gears play a major role in the performance of your bicycle, any amount of damage on these parts may lead to bad performance to fix bike gears.

Leave a comment

Please note, comments must be approved before they are published

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.